E-DOC-CTC-20090619-0010 v1.0
17
2 Thomson Gateway Basics
2.1.1 Status LEDs
Introduction
On the top panel of your Thomson Gateway, you can find a number of status LEDs, indicating the state of the
device.
Power LED
Ethernet LED
Wireless LED
Colour State Description
Green Solid on Power on, normal operation
Red Solid on Power on, self-test failed, indicating device malfunction
Orange Blinking Bootloader active (during upgrade)
Off Power off
Colour State Description
Green Solid on Ethernet connection, no activity
Blinking Ethernet activity
Off No Ethernet connection
Colour State Description
Green Solid on No wireless activity, WPA(2) encryption
Blinking Wireless activity, WPA(2) encryption
Orange Solid on No wireless activity, WEP encryption
Blinking Wireless activity, WEP encryption
Red Solid on No wireless activity, no security
Blinking Wireless activity, no security
Red/green Toggling Wireless client registration phase
Off WLAN disabled
To Next Page
Loading...
