THOMSON TG784 - Setting up Your Telephone Network

E-DOC-CTC-20090619-0010 v1.0
34
4 Telephony
4.1 Setting Up Your Telephone Network
Procedure
To set up your Thomson Gateway successfully, you must follow the following steps:
1 Connect your traditional phone(s) or fax to the green Phone port(s) on the Thomson Gateway’s back
panel.
2 Connect your Thomson Gateway to the traditional network.
For more information, see “4.1.1 Connection to the Traditional Telephone Network” on page 35.
3 Configure the VoIP service on your Thomson Gateway.
For more information, see “4.1.2 Configuring the Thomson Gateway VoIP Settings” on page 36.