THOMSON TG784 - Parental Control

E-DOC-CTC-20090619-0010 v1.0
63
7 Thomson Gateway Tools
7.1.3 Configuring UPnP on the Thomson Gateway
Introduction
On the Thomson Gateway GUI you can:
 Enable/Disable UPnP.
 Enable/Disable Extended Security.
Enable/Disable UPnP
Proceed as follows:
1 Browse to the Thomson Gateway GUI.
2 On the Toolbox menu, click Game & Application Sharing.
3 Under Universal Plug and Play:
 Select the Use UPnP check box, to enable UPnP.
 Clear the Use UPnP check box, to disable UPnP.
4 Click Apply.
Extended Security
If Extended Security is enabled only limited UPnP operation between the host and the Thomson Gateway is
allowed:
 A local host is not allowed to connect/disconnect the Thomson Gateway Internet connection. You can
then only connect/disconnect the Internet connection via the Thomson Gateway GUI
 Address translation mappings can only be added or changed via UPnP for the host on which the UPnP
application is running.
Enable/Disable Extended Security
Proceed as follows:
1 Browse to the Thomson Gateway GUI.
2 On the Toolbox menu, click Game & Application Sharing.
3 Under Universal Plug and Play, select Use Extended Security.
4 Click Apply.