ELECTRICAL SAFETY
• Proper Installation - Be sure your appliance is properly installed and grounded by a
qualified technician.
• Flush - mounted appliances may be operated only after they have been installed in
cabinets and workplaces that conform to the relevant standards. This ensures that
the appliances are installed in compliance with the appropriate safety standards.
• If your appliance malfunctions or if fractures, cracks, or splits appear:
- switch off all cooking zones
- unplug the range from the AC wall outlet
- contact your local service center.
WARNING
If the surface is cracked, switch off and unplug the appliance to avoid the possibility of
electrical shock. Do not use your cooktop until the glass surface has been replaced.
WARNING
• Ensure that the appliance is switched off before replacing the lamp to avoid the
possibility of electric shock.
• The range should not be placed on a base.
CHILD SAFETY
WARNING
• This appliance is not intended for use by young children or infirm persons without the
adequate supervision of a responsible adult.
• Young children should be supervised to ensure that they do not play with the
appliance.
• Keep children away from the door when opening or closing it as they may bump
themselves on the door or catch their fingers in the door.
• The cooking zones will become hot when you cook. To keep small children from being
burned, always keep them away from the appliance while you are cooking.
WARNING
Accessible parts may become hot during use. To avoid burns, young children should be
kept away.
IMPORTANT SAFETY INSTRUCTIONS
4
3
To Next Page
Loading...
