EasyManua.ls Logo

Thor Kitchen HRG4804U - User Manual

Default Icon
60 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
All Models
HRG PROFESSIONAL GAS RANGE

Table of Contents

Other manuals for Thor Kitchen HRG4804U

Preview: User Manual
User Manual56 pages
Preview: Operating Instructions
Operating Instructions11 pages

Questions and Answers

  • S
    Sara YoungSep 10, 2025
    What to do if one of the oven lights does not come on, but the oven works on my Thor Kitchen Ranges?
    • M
      Mr. Douglas Gonzalez Jr.Sep 12, 2025
      If one of the oven lights does not come on but the oven works, the light bulb may be loose or blown. See instructions for ‘Replacing the oven light bulb’ in the ‘Care and cleaning’ section. Instead of replacing the bulb, simply ensure that it is secure in its socket. If it has blown, replace the bulb. See instructions for ‘Replacing the oven light bulb’ in the ‘Care and cleaning’ section.
  • E
    Elizabeth OlsonSep 9, 2025
    What to do if the flames have suddenly gone out on my Thor Kitchen HRG4804U?
    • E
      Eric RobertsSep 9, 2025
      If the flames have suddenly gone out, it may be because a draft or spill has extinguished the flame. No action is required, as the burner will detect this and automatically relight. However, if there has been a large spill, it is recommended to turn the burners off and clean the burners and sump area. See ‘Care and cleaning’ for instructions.
  • T
    tashaleeSep 8, 2025
    What to do if sparking but no flame ignition on my Thor Kitchen Ranges?
    • K
      Kelly McculloughSep 8, 2025
      If there is sparking but no flame ignition, the gas shut-off valve may be in the ‘OFF’ position. Turn the shut-off valve to the ‘ON’ position.
  • A
    Antonio BrownAug 22, 2025
    What to do if there is a power failure and I want to use my Thor Kitchen HRG4804U cooktop burners?
    • D
      Dennis ReynoldsAug 23, 2025
      Yes, the cooktop burners can still be used during a power failure. To light them manually: Hold a lighted match to the flame spreader, push in on the control knob and turn counterclockwise to LITE. When the flame is burning all the way around the burner, you may adjust the heat. Important! If the flame is blown out during a power failure, turn the knob immediately to OFF, as the burner will not automatically relight and gas may escape.
  • D
    Denise SanchezSep 5, 2025
    What to do if my Thor Kitchen HRG4804U igniters spark continuously after flame ignition?
    • A
      Abigail WilsonSep 5, 2025
      If the igniters spark continuously after flame ignition, it could be due to reversed power supply polarity or wet/dirty igniters. Have the polarity corrected. If the igniters are wet or dirty, dry or clean them.
  • N
    Nancy PerezSep 4, 2025
    What to do if my Thor Kitchen Ranges oven will not heat?
    • S
      sheaangelaSep 5, 2025
      Make sure that the oven settings are correct. Follow the mode selection and clock settings as specified in the Oven Operation section of the manual.
  • C
    Collin ThompsonSep 3, 2025
    What to do if my Thor Kitchen Ranges oven doesn’t work (no heating)?
    • W
      Wendy GillespieSep 3, 2025
      Check that the circuit breaker hasn’t tripped and there is no power outage in your area. If there is a power outage, you cannot use the oven until power has been restored. There may be a problem with the power supply to the house, or there may be an outage. If it is a gas oven, contact your local gas supplier.
  • A
    Amanda ThompsonSep 2, 2025
    How to fix Thor Kitchen Ranges burners that will not light?
    • B
      Brandi NguyenSep 2, 2025
      If some burners on your Thor Kitchen Ranges won't light or the flames don't burn all around the burner cap, it's possible the burner parts or igniters are wet, dirty, or misaligned. Ensure the burner parts and igniters are clean, dry, and correctly assembled. Refer to the ‘Care and cleaning’ section for detailed instructions.
  • T
    Travis JonesSep 1, 2025
    What to do if Thor Kitchen HRG4804U Ranges has sparking but no flame ignition?
    • S
      Sharon HooperSep 1, 2025
      If your Thor Kitchen Ranges is sparking but the flame won't ignite, the gas shut-off valve might be in the ‘OFF’ position. Turn the shut-off valve to the ‘ON’ position to allow gas flow.
  • K
    Kevin WallsAug 31, 2025
    What to do if my Thor Kitchen HRG4804U burner flame goes out at low setting?
    • H
      hernandezjonathanAug 31, 2025
      If the burner flame on your Thor Kitchen Ranges goes out at a low setting, it could be due to low gas supply pressure or obstructed air intake holes around the knobs. Contact your gas company to check the gas supply pressure. Also, remove any obstructions around the air intake holes near the knobs.

Thor Kitchen HRG4804U Specifications

General IconGeneral
BrandThor Kitchen
ModelHRG4804U
CategoryRanges
LanguageEnglish

Related product manuals