89
WALL
THERMOSTATS
Note: For detailed information regarding the thermostat refer to the
manufacturer’s operating instruction manual.
Note: Refer to the operation manual for proper long term storage
procedures.
Note: Some thermostats are for cool only and will not have a heat
option.
Heating and Air Conditioning
Analog Model
Digital Model
Coleman-Mach
Choosing a Mode
Use the System selector to select Fan, Cool, Heat or to turn the system off.
Fan Control
Use the Fan selector to select Auto or On as well as the fan speed
Setting the Temperature
Use the slider on the temperature display to selecet the desired temperature.
Choosing a Mode
Use the Thermostat selector to select Cool, Heat or to turn the system off.
Fan Control
Use the Fan Mode selector to select Auto or On.
Use the Fan Speed selector so set the fan speed to Hi or Lo.
Setting the Temperature
Use the up and down arrow to the right of the digital display to set the desired
temperature.
To Next Page
Loading...
