THOR THPW-2000 - How These Inverters Work; Appliance Power Consumption

4
INTRODUCTION
Thank you for purchasing this THOR Power Inverter. Please read this Instruction Manual carefully before use to
ensure optimum performance and to avoid damage to this product.
This power inverter is configured to supply continuous power in the form of 120 volt AC outlets and a USB port to
run or recharge most household or electronic appliances.
FEATURES
The front Display, indicates power and proper operation of the inverter. This also displays inverter fault codes, if the
inverter happens to shut down from over-load or over-temperature condition, or abnormal input voltages. The ON/
OFF Switch turns the inverter ON and OFF. The switch can also be used to force reset of inverter circuits by
switching it OFF, then back ON again. All models also feature a port to attach a remote control (sold separately).
120 volt AC power is supplied through two North American three-prong type outlets. The outlets can accommodate
either two- or three-pin AC plugs.
Controls and Functions
FRONT OF UNIT (ALL UNITS)
1 2
6
3 4
1.
Ground Fault Circuit Interrupter (GFCI) duplex
outlet
2.
Digital display
3.
AC On/Off button
4.
Remote control port (Remote Sold Separately)
5. USB power Port
6.
Hard Wire Terminal Block
5