THORENS TD125 - Page 6

3. UNPACKING
Place the carton top side up and open. Remove the
outer 12° turntable platter and its rubber mat. After
installing the unit carefully centre the outer turntable
platter
on
the
inner
turntable
platter
with
the
rubber
mat on top.
After removing the upper part of the foam plastic, the
turntable may be removed from the carton
The accessories are stored beneath the turntable.
Take the complete unit out of the foam plastic bottom
part
and
put
it
down
on
a
fiat
surface.
Remove the spacer between the suspended chassis
and control panel.
Attention: Save the complete packing. Shipping the
turntable without this could cause serious damage.