THORENS TD402 DD User Manual

18
01. Counterweight
The counterweight is used for precise adjustment of the stylus pressure on the vinyl, to properly balance the
tonearm.
02. Anti-Skating Control
To set the anti-skating force of the tonearm.
03. Tone arm Lever
Use this lever to lower and raise the tonearm.
04. Tone arm Lock (arm rest)
To lock the tone arm in place when not in use.
05. Headshell
This holds the needle in place and provide needle protection
06. START/STOP switch
To switch to “START” to start the playing or switch to “STOP” to stop the playing
07. Platter
Place the record here when playing.
08. Rubber Mat
To provide floor protection, anti-slip safety and comfort
09. 33 / 45 RPM Switch
Select 33 or 45 rpm for playing a vinyl
FEATURES / TOP PANEL

THORENS TD402 DD Specifications

General

Drive System	Direct Drive
Tonearm	THORENS TP 72
Output	RCA
Phono Preamp	Built-in
Motor	DC Motor
Speed	33 1/3, 45 RPM
Platter	Aluminum
Cartridge	AT VM95E
Dimensions	420 x 140 x 360 mm (W x H x D)
Power Supply	External 12V DC