Need help?Do you have a question about the THORENS TD402 DD and is the answer not in the manual?
Counterweight, anti-skating, and arm lock for tonearm setup and balancing.
START/STOP switch and 33/45 RPM speed selection for playing vinyl.
Details on the platter, rubber mat, and headshell mounting.
Grounding terminal and RCA jacks selector for audio amplifier connection.
Controls connection to LINE-IN or PHONO-IN on the amplifier.
Power jack, power switch, and auto play function control.
Step-by-step guide for installing the turntable dust cover.
Guide to mounting platter, mat, headshell, and balancing the tonearm.
Instructions for placing records, selecting speed, and starting playback.
Procedures for replacing the stylus and cartridge.
Advice on record cleaning, stylus care, and general usage.
Instructions for safely packing and transporting the record player.
Drive system, motor, speed, platter, and rotation speed variation details.
Tonearm type, length, stylus pressure range, and cartridge weight support.
MM cartridge type, stylus construction, frequency response, and load impedance.
Analog output, power requirements, overall dimensions, and weight.
Counterweight, anti-skating, and arm lock for tonearm setup and balancing.
START/STOP switch and 33/45 RPM speed selection for playing vinyl.
Details on the platter, rubber mat, and headshell mounting.
Grounding terminal and RCA jacks selector for audio amplifier connection.
Controls connection to LINE-IN or PHONO-IN on the amplifier.
Power jack, power switch, and auto play function control.
Step-by-step guide for installing the turntable dust cover.
Guide to mounting platter, mat, headshell, and balancing the tonearm.
Instructions for placing records, selecting speed, and starting playback.
Procedures for replacing the stylus and cartridge.
Advice on record cleaning, stylus care, and general usage.
Instructions for safely packing and transporting the record player.
Drive system, motor, speed, platter, and rotation speed variation details.
Tonearm type, length, stylus pressure range, and cartridge weight support.
MM cartridge type, stylus construction, frequency response, and load impedance.
Analog output, power requirements, overall dimensions, and weight.
General| Drive System | Direct Drive |
|---|---|
| Tonearm | THORENS TP 72 |
| Output | RCA |
| Phono Preamp | Built-in |
| Motor | DC Motor |
| Speed | 33 1/3, 45 RPM |
| Platter | Aluminum |
| Cartridge | AT VM95E |
| Dimensions | 420 x 140 x 360 mm (W x H x D) |
| Power Supply | External 12V DC |
To Next Page
