Compact Scientific Digital Cameras Chapter 4: Operation
Page 18 ITN004347-D02
Chapter 4 Operation
The Compact Scientific series cameras can be operated using the ThorCam Imaging Software. For more details on
using ThorCam please consult the ThorCam User Manual.
4.1. Starting the Camera
With the camera software installed and the camera connected as instructed (Refer to Section 3.3), the Status LED
should light up solid Yellow, turning to solid Blue several seconds after power is applied. The table below details
the conditions represented by the status indicator.
If you are using the ThorCam Image Acquisition Software please refer to the ThorCam User Guide, which can be
accessed in the Documentation selection under the Start menu / All Programs listing for Thorlabs’ products.