Compact Scientific Digital Cameras Chapter 2: Description
Rev C, August 27, 2021 Page 5
2.3. Supplied Equipment
The following is a list of equipment that is supplied with your camera
Note 1 - All cameras are supplied with one USB3-MBA-118 cable. These cables are constructed to provide reliable data throughput at
a length of 3 m. Do not replace this cable with a 3 m cable from a different vendor. The use of a shorter cable (1 m or 2 m) may be
acceptable but is not guaranteed. Never use any cable that is longer than 3 m on a USB 3.0 system.
Note 2 – Included with CS165xU1 and CS165xU1/M models.
2.3.1. Optional Items
• Auxiliary I/O Patch cable – The optional I/O connectors on CS165xU1 and CS165xU1/M models allows
the user to access Trigger Input and Strobe Output functions (see Section 3.7).
Thorlabs CA3339 BNC-to-MMCX cables are included, or order Thorlabs CA3439 for the SMA-to-MMCX
version, which is compatible with the Thorlabs IOBOB2 Arduino Shield.
To Next Page
Loading...
Need help?
General
