Throwdown HIIT UBE - Page 6

Page 6
PROCEDURE
1. Bend the Platform Tread
(718-5572) upward and slide
the Center Plate of the frame
underneath it.
718-5572 Center Plate
Fig. 3
2. Secure the frame to the Platform
(720-5207-XX) with seven M10
Flat Head Machine Screws
(110-3663), two M5 Flat Head
Machine Screws, and seven M10
Countersunk Washers (120-3377).
110-3603
120-3377
110-3663
720-5207-XX
Fig. 4
3. Secure the Center Plate using two
M10 Socket Head Cap Screws
(110-3504) and two M10 Washers
(731-0367).
731-0367
Center Plate
110-3504
Fig. 5