ThrustmapperX user manual – 13/18
6. Configuring the triggers
Adjust the dead zones for the left and right triggers, in order to optimize your comfort and
responsiveness in games.
A dead zone corresponds to the zones defined for the trigger which do not respond to
movements, at the beginning (center) or at the end (outer) of its travel.
- The drop-down menu in the upper left-hand corner (1) lets you switch between profiles and
presets in the TRIGGERS page.
- Adjust the dead zones for the left and right triggers independently of one another (2).
- ROLLBACK, RESET, DUPLICATE and SAVE buttons (3):
ROLLBACK: return to the previous settings, since the last save.
RESET: reset all of the settings and content to their default values.
DUPLICATE: duplicate the settings for the selected trigger on the second trigger.
SAVE: save the current settings in the selected profile or preset.
To Next Page
Loading...
