Name: Thrustmaster T3PA-PRO
Brand: Thrustmaster
Rating: 4 (1 reviews)

To Next Page

To Previous Page

14/17

- Turn the pedal set 180°, then replace and retighten the screws in the 4 screw threads located on

the arch (16).

- Using the included 2.5 mm Allen key (20), unscrew the 3 metal heads (17) to turn them over 180°,

and swap the positions of the accelerator head and the clutch head.

You are now ready to play!

ELECTRONICALLY SWAPPING the accelerator and clutch pedals

When you physically invert the pedal set’s position, simply press the MODE button (located on the

base of your wheel) to swap the accelerator and clutch pedals electronically (the LED color indicates

the position you have selected).

PEDAL SET POSITION

LED COLOR

FLOOR-MOUNTED (F1-style)

(by default)

RED

SUSPENDED (GT/Rally-style)

GREEN

The selected position is then immediately stored in the wheel’s internal memory.

Questions and Answers:

Need help?

Do you have a question about the Thrustmaster T3PA-PRO and is the answer not in the manual?

Thrustmaster T3PA-PRO Specifications

General