Thrustmaster T3PA-PRO - Pedal Set Positioning; Inverting Pedal Set Position

13/17
INVERTING THE PEDAL SET’S POSITION
The T3PA-PRO pedal set has a unique design (patent pending) allowing for your choice of 2
different positions:
- Floor-mounted position (F1-style)
- Suspended position (GT/Rally-style)
By default, the pedal set comes in the floor-mounted position (F1-style).
Floor-mounted position (F1-style) Suspended position (GT/Rally-style)
PHYSICALLY INVERTING the pedal set
- Using the included 2 mm Allen key (19), unscrew the 4 screws holding the removable foot rest
(15) in place.