PLAYSTATION®3
Installing the wheel on PlayStation
®3
1. Plug the wheel’s USB connector (7) into USB port 1 on the console.
2. Switch on your console.
3. Start your game.
You are now ready to play!
Important notes regarding PlayStation
®3
- The wheel emulates the PS3™ gamepad controller (go to Options / Controller /
Gamepads to modify the configuration).
- In 1 player mode: if your official PS3™ gamepad controller is powered on, you must
switch it to controller port 2 in order for your wheel to be functional.
- Don’t hesitate to test out your wheel’s 2 sensitivity modes, to optimize its precision.
To Next Page
Loading...
