Thrustmaster T60 - Advanced Functions; Steering Sensitivity Adjustment; Button and Pedal Programming

5/10
ADVANCED FUNCTIONS
ADJUSTING THE WHEEL’S SENSITIVITY
Your wheel’s steering features 2 sensitivity modes:
- Normal sensitivity (the default mode)
- High sensitivity (must be selected)
• To switch to High sensitivity mode:
Action
LED (5)
Simultaneously press and release:
the D-Pad (1) + the 2 L1 & R1 paddle shifters (2).
FLASHES SLOWLY
Your wheel’s steering is now more sensitive.
(This procedure must be carried out following every restart or disconnection of your wheel)
• To return to Normal sensitivity mode (the default mode):
Action
LED (5)
Simultaneously press and release:
the D-Pad (1) + the 2 L1 & R1 paddle shifters (2).
DOES NOT FLASH
Your wheel’s steering has now returned to Normal sensitivity (the default mode).
PROGRAMMING THE WHEEL AND THE PEDALS
Your wheel is fully programmable:
- All action buttons can be swapped.
- All buttons can be programmed onto the paddle shifters or onto the pedals.
• Examples of possible uses:
- On PS3™, programming L2/R2 or L3/R3 onto the 2 Up & Down paddle shifters (L1/R1).
- On PS3™, programming the Cross/Square buttons onto the pedals (L2/R2 by default).
- Switching different buttons for greater accessibility.
• Programming procedure:
Steps
Action
LED (5)
1
Simultaneously press and release: SE + ST (6).
OFF
2 Press and release the button to program.
FLASHES
QUICKLY
3
Press and release the button or pedal on which you want
to place your function.
ON
Your programming has now been carried out.
(This procedure must be carried out following every restart or disconnection of your wheel)