Thrustmaster T60 - Pedal Set Configuration; Erasing Custom Programming; Pedal Mode Switching

6/10
• Erasing your programming:
Action
LED (5)
Press and hold down for 2 seconds: SE + ST (6).
TURNS OFF AND
THEN COMES BACK
ON AGAIN
Your programming has now been erased.
CONFIGURING THE PEDAL SET
By default, your wheel’s gas and brake pedals function in Separate mode, meaning that the
pedals function on independent axes.
This mode allows you to considerably improve your driving precision.
If your game does not support Separate mode, your wheel's pedal set will not function
properly. You will then have to switch to Combined mode.
• Pedal set mode changing procedure:
Simultaneously press and release: the 2 pedals + the PS button (4).
(This procedure must be carried out following every restart or disconnection of your wheel)
PEDAL SET MODE
LED (5)
SEPARATE (default mode: recommended)
RED
COMBINED
GREEN
• Setup of pedals on PlayStation®3:
Separate pedals
(default mode)
Combined pedals
(must be selected)
- Gas = R2 trigger
on the PS3™ controller
- Brake = L2 trigger
on the PS3™ controller
- Gas = Up direction on the PS3™
controller’s right mini-stick
- Brake = Down direction on the
PS3™ controller’s right mini-stick