3
1) Introduction
Danger Hints
Warning Danger of crushing!
By the accessible design of the machine there is a risk of crushing
Please make sure that during the adjustment and during
the test sequence no one comes to the area of the machine!
The device may only be operated by trained personnel.
Attention! The load cell can be destroyed by overload!
Especially upon moving the grips
or by lateral load is the danger that the load cell will be destroyed.
Install load cells carefully.
There must be no larger torque pull off the grips
pass through the load cell.
For smaller load cells, we recommend using pneumatic grips
To Next Page
Loading...