50
15) Declaration of Conformity
Test - Certificate
Testing machine: Z3, Z5, Z10, Z20, Z50
Serial number:
customer:
The testing machine listed above meets the requirements of DIN 51 221st
It is capable of acceptance by class 1
The load cells are used for calibration are approved as certified equipment, which will
be reviewed by the LGA Nuremberg.
Load cell: Nr
Non-linearity: 0.03%
Hysteresis: 0.015%
Manufacturer Nordic NTT
The load cell is capable of acceptance.
24.1.2014 Unterschrift
To Next Page
Loading...