6
2: CHECKING CONTENTS
The machines are shipped completely assembled except for the optional
accessories. The basic machines are supplied with the following items (please
insure that these are included for the installation):
- Z-Beam Load Cell at or below the maximum capacity of the load frame;
- Two Grip Pins (8 mm) for an adapter;
- operating instruction manual;
- load cell calibration certificate;
- One USB Serial Port Lead for external computer control;
- One 220 V cable.
The following diagrams are to help to identify each item:
Type Number of Machine:
On the backside of each machine you will find a type number (Type Nr.).
Please use it for future reference.
To Next Page
Loading...