THUNDER TIGER SLEDGE HAMMER S50 Parts Catalog

Specification:
Overall Length: 615mm / 24.2in.
Overall Height: 273mm / 10.7in.
Overall Width: 438mm/17.2in.
Wheelbase: 368mm / 14.5in.
Max Ground Clearance: 108mm / 4.25in
Front Track Width: 436mm / 17.2in
Rear Track Width: 436mm / 17.2in
Weight (RTR): 6200g / 13.76lb.
Wheel: DIA. 174mm / 6.85in
Power Plant: PRO-50BK Hex-Shaft Start Engine
Chassis: One-Piece Extruded Aluminum Channel Type
Transmission: 2 Speed Forward and Reverse
Drive Axle: CVA Universal Type
Suspension: Upper/Lower A-Arm with Pivot Ball
Shock: 8 Oil-Filled Type
Front Kick Up Angle: 9˚
ACCESSORIES
600cc Fuel Bottle
No.1116
No.1261
Glow Starters
Starters
No.2675 1.2V H.D. 180 starter
5-Way Wrench
Hex Driver Set
No.1103
No.2674 1.2V H.D. 90 starter
300cc Fuel Bottle
6mm
Starter
Extension
No.3801
No.1266
INCLUDED
JD6755 V2
No.2156 2.4Ah Long Glow Starter w/240V Chg
No.2157 2.4Ah Long Glow Starter w/220V Chg
No.2158 2.4Ah Long Glow Starter w/110V Chg
Pro-50BK
Hex-Start 8.2cc Engine
ACE R/C JAGUAR
3 Channel Radio
New oversized anodized heat sink head &
engine mount
New slipper clutch kit & all metal-geared
2-speed transmission w/reverse
New ultra tough steel spur gear
New heavy duty CVA
New high performance rear exhaust
aluminum tuned pipe
New stiffer shock springs
New PRO-50BK（8.2cc）monster power
plant:
New style body shell and decal scheme
New chrome spoke wheels & super grip
tires
New front impact absorbing bumper design
New rear wheelie bar
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)

THUNDER TIGER SLEDGE HAMMER S50 Specifications

Weight and Dimensions

overall length	615 mm / 24.2 in
overall height	273 mm / 10.7 in
overall width	438 mm / 17.2 in
wheelbase	368 mm / 14.5 in
max ground clearance	108 mm / 4.25 in
front track width	436 mm / 17.2 in
rear track width	436 mm / 17.2 in
weight (RTR)	6200 g / 13.76 lb
wheel diameter	174 mm / 6.85 in