10
____________________________________
Allows you to choose Fast or Slow setting
steps when you pre-program times (with
settings, for example).
Change setting with UP and DOWN buttons
Set for FSt and times will
increment in full seconds
Set for Slo and times will
increment in 50/1000ths of a second
____________________________________
Sets Circuit Training Program
Press the button
Set OFF or ON with UP and DOWN buttons
____________________________________
Selects LAP Timing. Preset number of Laps,
each Lap resets to Zero and starts counting,
100 Lap times are stored in memory.
LAP timing is turned OFF if set
with DOWN button
Set for 2 to 100 laps with UP and
DOWN buttons
Set upper left digit to 2, 5 or h with to
display LAP times for 2 or 5 seconds, or h
old
to next LAP, or BLANK for no display
To Next Page
Loading...