Thunderpaws SportTimer 3000 - Spli Enable SPLIT Timing; Sclc Set Rest Period for Circuit Training Program; Strt Set START Deadtime; Stop Set STOP Deadtime

11
____________________________________
Selects SPLIT Timing. Preset number of
Splits, each Split continues timing, 100 Split
times are stored in memory
SPLIT timing is turned OFF if set
with DOWN button
Set for 2 to 200 splits with UP
and DOWN buttons
Set upper left digit to 2, 5 or h with to
display SPLIT times for 2 or 5 seconds, or
hold to next SPLIT, or BLANK for no display
____________________________________
Sets Rest time for Circuit Training Program
Set with UP and DOWN buttons
____________________________________
Sets Start Deadtime on a Start Beam. Beam
will remain inactive for as long as it remains
broken, plus the Deadtime
Set with UP and DOWN buttons
in 1 sec. increments, up to 200 sec.
____________________________________
Sets Stop Deadtime on a Stop Beam. Beam
will remain inactive for as long as it remains
broken, plus the Deadtime
Set with UP and DOWN buttons
in 1 sec. increments, up to 200 sec.