Thunderpaws SportTimer 3000 - For Set Data Format for Wireless PC Interface; Batt Display Sport Timer Battery Voltage; Dflt Reset to Factory Default Settings; Test Wireless TEST Mode

12
____________________________________
Sets USB Data format with UP and DOWN
Buttons (Does NOT affect Sport Timer or Big
Display Scoreboard display format). Allows
adjustment of format for various software
packages that use the Wireless Data
Interface for Windows PC.
Send time data as mm.ss.ddd
Send time data as ssss.ddd
____________________________________
Displays Sport Timer battery voltage
Press the button
Battery Voltage – replace if
voltage falls below 8.30
____________________________________
Resets Sport Timer back to all Factory
Default Settings except System ID number.
button changes from no to yes.
Set for no, press the
button to cancel the reset to defaults.
Set for yes,Press the
button to complete the reset to defaults.
____________________________________
Enables testing of wireless radio range
For troubleshooting by factory technicians
____________________________________