36
Without further keystroke, the unit switches to Auto-Off-Mode after approx. 5
seconds. The last settings are saved.
5.7 Maximum Operation Time
When operating continuously in Cont- or Memory-Mode the unit stays switched-
on, until a key is pressed or until a selected maximum operation time has
elapsed. To set maximum operation time, after which the unit is turned-off
automatically in any way, switch the VD81 into Configuration-Mode. For this the
instrument must be switched-off. Hold the Mode-Key pressed then, until the
display shows "rAtE".
Then press Mode-Key several times, until the display shows "hour":
After 5 more seconds the current setting of maximum operation time is displayed:
Using the Mode-Key you can now select a
timespan from 1h to 24h or cont (no switch-
off).
Without further keystroke, the unit switches to Auto-Off-Mode after approx. 5
seconds. The last settings are saved.
MODE
MODE
To Next Page
Loading...
