Thyracont VSP63D - 2 Vacuum Transducer VSP;VCP; For Orientation; Delivery Content

31
2 Vacuum Transducer VSP/VCP
2.1 For Orientation
These operating instructions describe installation and operation of products with
article numbers
VSP63D, VSP64D, VCP63D, VCP64D,
VSP63DL, VSP64DL, VCP63DL, VCP64DL.
The article number can be found on the product’s type label. Technical modificati-
ons are reserved without prior notification.
2.2 Delivery Content
Included in the delivery consignment are:
− Transducer VSP/VCP
− Protective flange cover
− Operating instructions
Available Accessories:
− Accessory Set Smartline, SLZUB:
Protective case,
Interface converter RS485-USB,
Plug-in power supply 24 V
− Centering ring DN16KF with metal wire filter, ZZDF016
Connectors and Cables:
− Measurement cable 2m for VD12/VD14, W1515002
− Measurement cable 6m for VD12/VD14, W1515006
− Measurement cable 2m with open ends, W1500002
− Measurement cable 6m with open ends, W1500006
− Counterplug Smartline IP54, XB15SL05
∗
− Measurement cable IP54, 2m with open ends, W1500502
∗
− Measurement cable IP54, 6m with open ends, W1500506
∗
∗
) IP54 single connector, transducers cannot be daisy-chained by RS485 this way!
VSP/VCP-RS485-200116