OPERATING MANUAL DAF290 TRANSPORTATION AND STORAGE
ThyssenKrupp Aufzugswerke GmbH
Check on acceptance by the recipient
The delivered parts and their packaging are to be checked for completeness,
damage or other conspicuous features.
Reporting and documenting damage in transit
On delivery, make sure that no damage in transit has occurred.
• Any damage that is determined is to be documented immediately
(sketch, photo, description of the damage).
• Forward the corresponding documents without delay to
THYSSENKRUPP AUFZUGSWERKE GmbH.
Unpacking
Information
• Dispose of packaging materials in an environmentally compatible
manner or reuse them.
• Specific transport equipment and shipping braces remain with the
customer.
Intermediate storage
• If the assembly is not installed immediately after delivery, it must be
stored carefully in a protected location. On covering, attention is to be
paid to ensuring that no condensation can form and that no moisture can
penetrate.
• The subassembly must not be stored outdoors. Bare parts have no long-
term preservation.
Ambient conditions
Information
Th
e environment at the final location (moisture, temperature) must
correspond to normal indoor climate conditions for machine rooms.
(According to EN 81 between +5 °C and +40 °C)
The relative air humidity must not exceed 70%.
Product has been
replaced
To Next Page
Loading...
Need help?
General
