O
PERATING
M
ANUAL
DAF380
S
AFETY
ThyssenKrupp Aufzugswerke GmbH
Constructional changes to the DAF380 machine
The DAF380 is set in the factory and delivered ready for operation.
If changes are made to the machine, the entire warranty of
THYSSENKRUPP AUFZUGSWERKE GmbH shall become null and void.
Dangers in handling the DAF380
The DAF380 may only be operated in an enclosed machine room and only
with the cover and rope guard fitted on the traction sheave and deflecting
rope pulley.
Before mounting the handwinding wheel, the power to the drive must be
disconnected and the installation secured against inadvertent activation.
Remove the handwinding wheel before reconnection.
It must be ensured when persons are in the machine room that there is
adequate safety clearance to all revolving (marked in yellow) parts.
In the event of improper use, there is a risk of personal injury or to the life of
the user or third parties, or impairment on the assembly or other assets can
arise. Malfunctions that can impair safety are to be rectified immediately.
To Next Page
Loading...
Need help?
General
