O
PERATING
M
ANUAL
DAF380
T
RANSPORT AND
S
TORAGE
ThyssenKrupp Aufzugswerke GmbH
4. Transport and Storage
Packaging:
The DAF380 is bolted directly to a special 1400x1050 pallet with 8 bore
holes.
Further packaging depends on the order and is country-specific (air/sea/land
freight).
Transport:
Transport must be effected in compliance with the safety regulations and
observing the centre of gravity of the machine and base frame.
Fork-lift truck transport:
• In the case of transport with a fork lift, the forks used must be long
enough to prevent the transported goods from tipping over.
• Always pick up the base frame and/or transport pallet, not the machine
itself, with the forks.
• Pay attention to protruding parts! Danger of injury and damage!
Crane transport:
• Do not walk underneath suspended loads!
• Transportation chains or ropes are to be secured in the 4 corner drilled
holes of the machine base frame. Pay attention to the centre of gravity!
• In the case of delivery without a base frame, attach to the transport
support and/or the eye bolts next to the forced ventilation and secure
against tilting. Do not lift by the motor casing!
• After transport, remove the wooden transport protection slats.
Fig. 4.1
To Next Page
Loading...
