O
PERATING
M
ANUAL
DAF380
T
RANSPORT AND
S
TORAGE
ThyssenKrupp Aufzugswerke GmbH
Intermediate storage
• If the assembly is not installed immediately after delivery, it must be
stored carefully in a protected location. On covering, attention is to be
paid to ensuring that no condensation can form and that no moisture
can penetrate.
• The assembly must not be stored outdoors. Bare parts have no long-
term preservation.
Ambient conditions
Information
The environment at the final location (moisture, temperature) must
correspond to normal indoor climate conditions for machine rooms
(according to EN 81 between +5° and +40° C).
The relative air humidity must not exceed 70%.
To Next Page
Loading...
Need help?
General
