OPERATING MANUAL DAF380 MAINTENANCE/SERVICE
ThyssenKrupp Aufzugswerke GmbH
• For drives with counter rollers or diverter pulleys the middle offset "M"
(see Fig.3.4 Chapter 3) and/or the alignment of the rope grooves of the
traction sheave and rope pulley are to be checked, if necessary by
moving the drive alignment on the base frame.
• Install traction sheave cover.
Important : If installed incorrectly, the traction sheave can be released.
Ensure screws are secure and tightening torque is correct!
See Chapter 9.
To Next Page
Loading...
