OPERATING MANUAL 2. TRANSPORT AND STORAGE
ThyssenKrupp Aufzugswerke GmbH 10
2. Transport and storage
Packing:
The TW130 is delivered wrapped in foil on a special pallet.
Transport:
Machine and frame must be perfectly horizontal and the safety precautions
observed.
The machine must be perfectly horizontal or vertical (depending on the
mounting position). Never tilt as it is delivered filled with oil.
Transport by fork lift:
The forks must be of proper length to prevent the machine from tilting.
See to it that the forks are attached to the frame or transport pallet and
not to the machine.
Pay attention to projecting parts! There is the risk of injury to persons or
damage!
Transport by crane:
Do not stay below suspended loads!
Fasten transport chain or rope using transport aids.
Do not lift the motor housing!
Remove transport aids after transport.
Note: the pictographs on the packing or other noticeable places.
Top Handle with care Keep dry
Do not expose to
heat
Do not use handheld
grippers
Fasten here
To Next Page
Loading...
Need help?
General
