OPERATING MANUAL 1. SAFETY
ThyssenKrupp Aufzugswerke GmbH 9
unauthorized of drives (rating etc.)
unsatisfactory supervision of parts that are subject to wear
inexpert repair work
catastrophes caused by outside influences and Act of God.
Constructional modifications of machine TW130
TW130 is adjusted at the factory and delivered filled with oil and ready for
operation.
Attention : prior to starting operation, check whether the gear is properly
oiled and the oil level approx. even with the middle of the oil gauge. Re-fill or
discharge, if necessary.
In the case of modifications ThyssenKrupp Aufzugswerke GmbH cannot be
hold liable.
Use of TW130 and possible hazards
Traction sheave and handwinding wheel of the TW130 do not have
protecting covers. This means that the machine is to be operated in a closed
machine room only. See to it that the safety distance to all revolving parts
(marked yellow) is observed by persons working in the machine room.
Inexpert handling can cause danger to life for the user or third parties resp.
impairment of the component or material property.
Failures which possibly impair the correct functioning are to be eliminated
immediately.
To Next Page
Loading...
Need help?
General
