II
Safety and Regulatory Compliance
1. Overview
The operation, maintenance, repair and transportation of Genesy PCR Thermal Cycler
(hereinafter referred to as Genesy thermal cycler) shall strictly follow the basic safety
specifications listed in this section and through this manual. Non observance of the instruction
provided or performing any operations not stated in the manual may affect the safety protection
provided by the Genesy thermal cycler, and may also destroy the safety standards of design and
manufacture as well as the expected application range of the instrument.
2. Special Declaration
Before install and use the Genesy thermal cycler, please read this manual carefully and observe
the warnings and non-recommended functions. Also bear mind the potential scope for misuse; it
is advisable to draw attention to the possible consequences. Users must be aware of the possible
hazards of this instrument and its accessories. For correct operations that are complied with the
specifications and the matters needing attention mentioned in this manual, the Genesy thermal
cycler will not cause any danger to operation personnel.
XATL Co., Ltd. will not be responsible for any possible consequence caused by the violation of
following safety specifications.
3. Label, Symbol and Conventions
3.1 Safety Labels on Instrument
Biohazard: indicates that a certain area of the instrument can be easily
contaminated with biological reagents or samples. Reminding user to timely disinfect
this area, keep necessary precautions during operation and take corresponding
protective measures at the same time.
High Temp.: indicates that a certain area of the instrument may produce high
temperature. Reminding user to pay attention and be careful for burns.
Moving Part: indicates that a certain moving part of the instrument may cause
personal injury. Reminding user to proceed with appropriate caution.
IVD Instrument: the instrument belongs to In Vitro Diagnostic equipment.
To Next Page
Loading...