27
3. Please take the Genesy thermal cycler out of the box. Carefully check the instrument and the
accessories according to the packing list, ensure that all components are present and intact,
report any damage or lack to the distributor or XATL Co.,Ltd.
4. Installation Method:
a. Please place the Genesy thermal cycler according to the instrument placement requirements
and other safety requirements mentioned in this manual. Plug the instrument as the power
supply requirements mentioned in this manual. Power on and start for utilization.
b. Before the installation, please read the ‘Safety and Regulatory Compliance’ carefully in
order to use correctly!
Reminding: The package internal items should be in accordance with the packing list.
To Next Page
Loading...