Tibo TI430 - Bluetooth Connectivity; Pairing a Bluetooth Device; Connecting a Paired Device

10
Turn it back on
To pair with a Bluetooth device
1. With your Bluetooth device and the TIBO TI430 BT/Ampli er both turned on, press the BLUETOOTH button
on the TI430 BT/Ampli er to make the system discoverable.
The BLUE will appear on the TI430 BT/Ampli er display to show that the system is discoverable.
2. Set your Bluetooth device to discoverable so it can discover (refer to your Bluetooth device guide for details)
TIBO TI430 BT/Ampli er. Locate the Bluetooth device list in the user interface of your device.
3. From the Bluetooth device list, select the device named “TIBO TI430”.
4. If your Bluetooth device prompts you for a passcode, enter digits 0000 (four zeros) and press OK. Some
devices also ask you to accept the connection. Your Bluetooth device indicates when pairing is complete.
Connecting a paired device
To connect a previously paired device.
1. Turn On the device and press BLUETOOTH button until BLUE appears on the TIBO TI430 BT/Ampli er
display.
2. From the Bluetooth device list, select the device named “TIBO TI430”.
BLUETOOTH SETUP