13
Turn it back on
TROUBLE SHOOTING
Problem Solution
No power when the ampli er is turned On. Turn on the power at the wall outlet.
Check that the plug has been correctly inserted into the wall
outlet.
The internal fuse has blown and must be replaced by a quali ed
service technician.
The power cord has been damaged and must be replaced.
The VFD (Vacuum Fluorescent Display) on the ampli er
does not display any information.
The ampli er is defective and should be serviced by a quali ed
technician.
Error 1 message is displayed on the ampli er. The ampli er is defective and should be serviced by a quali ed
technician.
The ampli er does not switch between inputs. The ampli er is defective and should be serviced by a quali ed
technician.
To Next Page
Loading...
