
Do you have a question about the TIC GS5 and is the answer not in the manual?
| speaker_driver | 5.25” full range Co-Axial Driver |
|---|---|
| woofer | Injection molded PP cone with Butyl rubber surround |
| tweeter | 1" aluminum |
| frequency_response | 67Hz – 19kHz |
|---|---|
| sensitivity | 86db ± 3db |
| power_handling | 50 / 100W |
| unit_size | 12.5x12.5x12.5 inches |
|---|---|
| unit_weight | 10 Lbs |
| pack_size | 13x13x13 inches |
| speaker_driver | 5.25” full range Co-Axial Driver |
|---|---|
| woofer | Injection molded PP cone with Butyl rubber surround |
| tweeter | 1" aluminum |
| frequency_response | 67Hz – 19kHz |
|---|---|
| sensitivity | 86db ± 3db |
| power_handling | 50 / 100W |
| unit_size | 8.8x8x8 inches |
|---|---|
| unit_weight | 5.2 Lbs |
| pack_size | 10x17x9 inches |
| speaker_driver | 8” full range Co-Axial Driver |
|---|---|
| woofer | Injection molded PP cone with Butyl rubber surround |
| tweeter | 1" aluminum |
| frequency_response | 36Hz – 19kHz |
|---|---|
| sensitivity | 89db |
| power_handling | 100 / 200W |
| unit_size | 13.7x6.5x6.5 inches |
|---|---|
| unit_weight | 3 Lbs |
| pack_size | 12x14.5x7.5 inches |
Provides recommendations on speaker cable selection, routing, burial depth, and avoidance of obstacles and corrosive elements.
Loading...