User Manual SDR-OMNI Avionics Test Set
Page 6 6 June 2023 Revision B
CHAPTER 2 PREPARATION FOR USE
This section contains all necessary information on the initial unpacking, inspection, and setup of the SDR-OMNI.
Each SDR-OMNI has already undergone a comprehensive series of tests, full calibration, and Quality Assurance
checks before shipment from Tel-Instrument Electronics Corp.
2.1 UNPACKING
1. After receiving the SDR-OMNI, inspect the shipping container for damage. Note any damage in case the
SDR-OMNI unit is also damaged.
2. Remove the SDR-OMNI from the shipping container and packaging material. Retain the shipping container
and packaging material for future shipment or storage.
3. Inspect the SDR-OMNI for damage to casing, connectors, switches, buttons, and display screen. If damage is
found, DO NOT use the SDR-OMNI and contact Tel-Instrument Electronics Corp. Customer Service in
accordance with the Warranty. Make sure to inform Customer Service if the shipping container is also
damaged.
4. Verify that all the accessory items listed in Table 2-1 were received.
2.2 ACCESSORIES PROVIDED
Table 2-1. Accessories Included with the SDR-OMNI Avionics Test Set
To Next Page
Loading...