TIC SDR-OMNI - Chapter 3 SDR-OMNI Overview; Controls

User Manual SDR-OMNI Avionics Test Set
Page 20 6 June 2023 Revision B
CHAPTER 3 SDR-OMNI OVERVIEW
3.1 CONTROLS
Figure 3-1 illustrates the controls for the SDR-OMNI. Table 3-1 describes the SDR-OMNI controls.
Figure 3-1. Controls for SDR-OMNI
Table 3-1. Description of SDR-OMNI Controls
KEY
NAME
DESCRIPTION
1
Status Indicators
Indicates the GPS and battery status.
2
5-Way Switch
Power ON: Briefly press the OK middle button to turn the unit ON.
Power OFF: Hold the OK button for ~5 seconds to turn the power OFF. A
“Confirm shutdown” window will appear on the screen. Press “Power Off” to turn
off.
The Up/Down arrows allow the user to move between active fields on the various
test screens.
3
Back Icon
Selecting this virtual button will return to the previous screen.
4
Home/Settings/Set-
up Icon
Selecting this virtual button will bring up a small menu that allows the operator to
directly navigate to: (1) Home (Home Menu), (2) Settings menu (global settings,
for example: Screen Brightness, Screen Timeout, Distance Units, etc.), or (3)
Application specific Setup menu
2
4
3
2023-CLS-TIC-0021
1