SDR-OMNI Avionics Test Set User Manual
Revision B 6 June 2023 Page 29
4.6 RETRIEVING AND PRINTING TEST REPORTS
Saved test reports that were generated by the FAA Part 43 Transponder Test, the FAR 91.227 ADS-B OUT Test,
and the ELT Test can be viewed by going to: Home Menu -> System -> Test Reports. View the test report by
pressing the small File icon on the right. The Trash Can icon will delete the report.
4.6.1 Retrieving and Printing via PC or Laptop
1. Connect the SDR-OMNI to a PC or laptop USB port using one of the supplied USB cables (see
Figure 2-8).
2. With the unit power ON, enter the following address into the browser: http://sdromni-0501.local/. The
Test Reports Webpage (Figure 4-4) will display. If this is unsuccessful, enter http://192.168.78.1/
3. Select View to view the desired PDF report. Print using the local printer if desired.
Figure 4-4. Test Reports Webpage
4.7 UPDATING SDR-OMNI SOFTWARE
Tel-Instrument Electronics (TIC) occasionally issues new software updates to add features, fix bugs, and improve
the user experience.
These updates are available on the TIC website (www.telinst.com). The user must first register under Technical
Support to gain access to the latest software version.
Software updates are done using a PC or laptop running Microsoft Windows 10 or later.
4.7.1 Installing the SDR-OMNI Updater Program
First, the user must install the SDR-OMNI Updater Program on the PC or laptop computer. The installation file is
found on the CD-ROM that was part of the SDR-OMNI accessories kit. This program can also be downloaded
from the TIC website.
Once downloaded and selected, install this program on the PC or laptop.
4.7.2 Download latest SDR-OMNI file from TIC website
On the TIC website, go to Technical Support -> SDR-OMNI Software update. Enter your registered login
credentials to gain access. Follow the instructions to download the latest file to your computer. It is suggested that
you create a folder called SDR-OMNI Updates to store the file.
The filename should be: SDR-OMNI-rX.Y.Z.swu.
To Next Page
Loading...