TIC SDR-OMNI - Page 119

SDR-OMNI Avionics Test Set User Manual
Revision B 6 June 2023 Page 115
Table 8-5. GPS Receiver
SPECIFICATION
DESCRIPTION
Position
Current test set position and time is available to test applications
Time Accuracy
Test set tracks UTC Time +/-60 ns (when GPS signals are acquired)
Table 8-6. TAP-OMNI Transponder/DME Antenna Coupler
SPECIFICATION
DESCRIPTION
Antenna
Compatibility
Standard blade antenna, with adapter for dipole antenna
Antenna
attachment
Padded lever actuated clamp retains coupler in any position
Cable
33 ft (10 m) cable attaches to test set Direct T/R connector.
Accuracy
+/- 1 dB (+ test set T/R port accuracy)
Table 8-7. Digital I/O
SPECIFICATION
DESCRIPTION
High Voltage Logic
Output
1 channel open collector type
Connector
TEST connector, DB-15 HD
Max voltage
50V peak (output off state)
Max current
100 mA (output on state)