TIC SDR-OMNI - Page 89

SDR-OMNI Avionics Test Set User Manual
Revision B 6 June 2023 Page 85
Figure 5-34 DME Test screen
Table 5-10 DME Test screen Field Description
NAME
DESCRIPTION
Range
Either field can be used to enter the initial range. When testing, both
fields display the simulated range.
Velocity
Either field can be used to enter the velocity. This field can be
changed during the test.
Power
Measured RF power from the DME UUT
Frequency
Measured RF frequency of the DME UUT transmitter
P1-P2 Spacing
Measured spacing between P1 and P2 interrogation pulses in
microseconds
2023-CLS-TIC-0061