23
SHIFT RED User Manual
ⓒ 2019. this is engineering Inc. All Rights Reserved.
Firmware Updates
Firmware updates are provided to optimize the performance of SHIFT RED. Update
the aircraft to the latest firmware by following the procedure below:
1. From the download page (www.thisiseng.com/support/download/) of the SHIFT
website, download the firmware to a micro SD card.
2. With the aircraft powered off, remove the battery and insert the micro SD card
into the micro SD slot.
3. When the aircraft is powered on after inserting the battery, the firmware update
begins automatically and the front LED blinks.
4. The firmware update takes approximately two minutes, and the aircraft is
automatically rebooted in the process. Do not remove the battery or turn off the
aircraft while updating.
5. Upon the completion of the firmware update, the aircraft is automatically powered
off, and the firmware file in the micro SD card is deleted.
To Next Page
Loading...
