56
ⓒ 2019. this is engineering Inc. All Rights Reserved.
Sensor Calibration
The SHIFT drone achieves greater flight accuracy through sensor calibration.
1. Before using the SHIFT Drone application, place the drone on a flat surface with
the protectors removed.
2. Turn on the drone, but do not run the motors.
3. To perform calibration, position the drone as illustrated in the SHIFT Drone
application.
The application and drone must be connected with Wi-Fi during sensor calibration.
Each step of calibration may take some seconds (Max. time of 6 minutes with max. 1 minute per step).
Contact the customer center if flight performance does not improve even after sensor calibration.
To Next Page
Loading...
