Tiger Bengal - Step 5: Floor Installation; Securing the Floorboards; Step 6: Continuing Wall Construction; Building Walls Layer by Layer

TIGER BENGAL LOG CABIN GENERAL INSTRUCTIONS
Step 5:
SECURING FLOOR
• Starttolaytheoorboards.Thereshouldbea2.5mmgapbetweentheedgeoftheoorboardsandtheouter
 logstoallowforexpansionandcontracon.SeeDetailE.
• Nailtheoorboardstothetanalisedbearersbelowwith2xBA40evenlyspacedperoorboardper
 tanalisedbearer.
• Anglecuttheoorboards.Measurefrominsideofdoorlogs.
NOTE: DO NOT CUT THROUGH TANALISED BEARERS.
Step 6:
CONTINUE TO BUILD WALLS
• Usingconstructdiagramasaguide,begintobuildupthewallsbyinterlockingthelogslayerbylayerunl
 3logshigh.
10
gersheds.com 0113 205 4189 sales@gersheds.com
E