Tiger BLAKE - Step 8: INSTALL GABLE TOPS; Step 9: INSTALL PURLINS

TIGER BLAKE LOG CABIN GENERAL INSTRUCTIONS
Step 8:
INSTALL GABLE TOPS
• Unscrewpentgabletopasshown.Keepscrewsinasafeplace.
• Installpentgabletops.Place
1
ontopofthenalsidelogs.
• Fitlogstohighandlowsideofcabinasshown.
• Repeattheprocessfor
2 3 4
logsfrompentgabletop.Builduplogsonhighsidetocompletethiswall.
• Securepentgabletopbacktogetherusingpreviouslyremovedscrews.
NOTE: LARGER CABINS MAY HAVE ADDITIONAL TRUSSES TO
SUPPORT ROOF.
PLEASE REFER TO YOUR CONSTRUCT DIAGRAM.
4
3
2
1
1
2
4
3
Step 9:
INSTALL PURLINS
• Posionthepurlinswiththeangledcutstotheboom.(Detail G1)
 Ensurenotchesinpurlinslineupwithgabletops.
• Securethepurlinsintothegabletopsusing2xN65perpurlinpergabletop.
(Detail G2)
• Repeatforallpurlinandgabletopjoins.
STANDARD PURLIN
STANDARD PURLIN WITH EXTRA NOTCH(ES)
G1
G2
N65
N65
12
gersheds.com 0113 205 4189 sales@gersheds.com