STEP 4. Set the inner pan into the rice cooker
●Wipe off any water drops, or rice grains from the outer
surface and brim of the inner pan.
Reminder: ●Check if steam vent cap is in place (see page 28).
●Check if the inner lid is set. (JBA-T model)
Be sure to set the inner pan correctly.
NOTE: Remove any rice grain on heater plate, center sensor,
hook button and upper casing.
Adhering material can prevent the casing from closing
and cause it to open while the rice is cooking.
STEP 5. Plug the AC power cord into the AC outlet
If the Keep warm lamp is on, press the [Cancel] key to reset the function.
“Rice cooker is in cooking operation” includes rice cooking, slow cooking and steaming.
OFF
120V type
220V-240V type
Beep
To Next Page
Loading...
Need help?
General
